Side control operationAutomatic electornic ignitionHeavy duty trivetsSet up for natural gas with LPG jets suppliedFlame failureBlack burner capsStainless steel ultra low profilePan rest option incorporated in central pan stand Brushed inox finishRecommended for granite benchtopsComes with canali and polycarbonate knobsComes with NZ plug
Rear Left 6.3 MJ/h Semi rapid
Front Left 6.3 MJ/h Semi rapid
Centre 14.4 MJ/h Ultra rapid
Rear Right 6.3 MJ/h Semi rapid
Front Right 3.78 MJ/h Auxiliary
Dimensions (h w d)
Cutout (w d)
2 years parts and labour from original date of purchase
Venting Requirements: May be placed close to vertical surfaces no higher than the hob surface. If installed next to tall kitchen units a min. Gap of 50mm is required. The back wall and adjacent surfaces must withstand temp of 65 Celsius above room temp.Distance from wall must be min 50mm and a min of 200mm from the periphery of the nearest burner to any vertical combustible surface.
This specification page should not be regarded as an infallible document. Only actual product should be used to determine cut out sizes. We reserve the right to change specifications of products at any time.
Took 0 milliseconds